MagicDMX Connection Confirmation and Status Lights

MagicDMX devices do NOT need any additional drivers – they use HID drivers within the operating system. Simply plug in the device and start MagicQ.

To Confirm Connection between Magic Q and your Magic DMX please open MQPC, 

  • Click on Setup

  • View System

  • View Staus

  • Interfaces

  • You will see "Magic DMX Status Listed as DMX out, and either Basic or Full Depending on what hardware you have connected. 

When first plugged in the MagicDMX alternates green and orange LEDs every second. When MagicQ is started and connects to the device then the green LED is on permanently and the orange flashes faster as it receives data from MagicQ.



Chamsys USA                   Support@ChamsysUsa.com                             (772)410-5762


Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us